Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for LM4B500AZMC-1
The LM4B500AZMC-1 specifies: The Rack and Pinion System L Series- AZ Series Equipped is a linear actuator in which a rack and pinion mechanism with a motor have been combined. The motor is equipped with the AZ Series that utilizes a battery-free absolute sensor, which allows for high positioning accuracy and high-load transportation., Horizontal Operation, Driver and Connection Cables required* (sold separately)
| Frame Size | - 80 mm |
| Type | - High-Speed |
| Electromagnetic Brake | - Equipped |
| Linear Direction | - Horizontal |
| Motor Type | - AZ Series (Positioning Control) |
| Power Input | - AC |
| Maximum Speed | - 500 mm/s |
| Max. Horizontal Transportable Mass | - 20 kg |
| Maximum Acceleration | - 1 m/s2 |
| Thrust | - 220 N |
| Push Force | - 220 N |
| Max. Holding Force | - 220 N |
| Minimum Travel Amount | - 0.01 mm |
| Rotor Inertia | - 530x 10-7 kg·m² |
| Stroke | - 100 mm |
| Repetitive Positioning Accuracy | - ±0.25 mm |
| Thermal Class | - 130 (B) [UL Recognized 105 (A)] |
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the case and motor windings or case and electromagnetic brake windings |
| Dielectric Strength | - Sufficient to withstand 1.5 kVAC, 50 Hz or 60 Hz between the case and motor windings or case and electromagnetic brake windings for 1 minute. |
| Ambient Temperature | - 0 to +40ºC (non-freezing) (+32 ~ +104ºF) |
| Ambient Humidity | - 85% or less (Non-condensing) |
| Operating Atmosphere | - No corrosive gases or dust. The product should not be exposed to water, oil or other liquids. |
| Degree of Protection | - IP30 (excluding rack moving part and connector part) |
| Rotation Detection Range in Power OFF State | - ±900 Rotations 1800 Rotations at Motor Output Shaft) |
Product options for LM4B500AZMC-1
Product tips for LM4B500AZMC-1
Product announcements for LM4B500AZMC-1
Product documents for LM4B500AZMC-1
| - CAD 3D (*.step) | |
| - Product Brochure | |
| - L Series Operating Manual | |
| - AZ Series Motor Operating Manual |
