Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for LM4F500AZAC-1
The LM4F500AZAC-1 specifies: The Rack and Pinion System L Series- AZ Series Equipped is a linear actuator in which a rack and pinion mechanism with a motor have been combined. The motor is equipped with the AZ Series that utilizes a battery-free absolute sensor, which allows for high positioning accuracy and high-load transportation., Vertical Operation, Driver and Connection Cables required* (sold separately)
Frame Size | - 80 mm |
Type | - High-Speed |
Electromagnetic Brake | - Not Equipped |
Linear Direction | - Vertical |
Motor Type | - AZ Series (Positioning Control) |
Power Input | - AC |
Maximum Speed | - 500 mm/s |
Max. Vertical Transportable Mass | - 19.5 kg |
Maximum Acceleration | - 1 m/s2 |
Thrust | - 220 N |
Push Force | - 220 N |
Max. Holding Force | - 220 N |
Minimum Travel Amount | - 0.01 mm |
Rotor Inertia | - 370x 10-7 kg·m² |
Stroke | - 100 mm |
Repetitive Positioning Accuracy | - ±0.07 mm |
Thermal Class | - 130 (B) [UL Recognized 105 (A)] |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the case and motor windings. |
Dielectric Strength | - Sufficient to withstand 1.5 kVAC, 50 Hz or 60 Hz between the case and motor windings for 1 minute. |
Ambient Temperature | - 0 to +40ºC (non-freezing) (+32 ~ +104ºF) |
Ambient Humidity | - 85% or less (Non-condensing) |
Operating Atmosphere | - No corrosive gases or dust. The product should not be exposed to water, oil or other liquids. |
Degree of Protection | - IP30 (excluding rack moving part and connector part) |
Rotation Detection Range in Power OFF State | - ±900 Rotations 1800 Rotations at Motor Output Shaft) |
Product options for LM4F500AZAC-1
Product tips for LM4F500AZAC-1
Product announcements for LM4F500AZAC-1
Product documents for LM4F500AZAC-1
- CAD 3D (*.step) | |
- Product Brochure | |
- L Series Operating Manual | |
- AZ Series Motor Operating Manual |