Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for LM4F150AZMK-10
The LM4F150AZMK-10 specifies: The Rack and Pinion System L Series- AZ Series Equipped is a linear actuator in which a rack and pinion mechanism with a motor have been combined. The motor is equipped with the AZ Series that utilizes a battery-free absolute sensor, which allows for high positioning accuracy and high-load transportation., Vertical Operation, Driver and Connection Cables required* (sold separately)
| Frame Size | - 80 mm |
| Type | - High-Speed |
| Electromagnetic Brake | - Equipped |
| Linear Direction | - Vertical |
| Motor Type | - AZ Series (Positioning Control) |
| Power Input | - DC |
| Maximum Speed | - 150 mm/s (24 VDC) , 250 mm/s (48 VDC) |
| Transportable Mass | - 20 kg (24 VDC: 60 mm/s, 48 VDC: 150 mm/s) , 7 kg (24 VDC: 150 mm/s, 48 VDC: 250 mm/s) |
| Maximum Acceleration | - 1 m/s2 |
| Thrust | - 220 N (24 VDC: 60 mm/s, 48 VDC: 150 mm/s) , 77 N (24 VDC: 150 mm/s, 48 VDC: 250 mm/s) |
| Push Force | - 220 N |
| Max. Holding Force | - 220 N |
| Minimum Travel Amount | - 0.01 mm |
| Rotor Inertia | - 530x 10-7 kg·m² |
| Stroke | - 1000 mm |
| Repetitive Positioning Accuracy | - ±0.07 mm |
| Thermal Class | - 130 (B) [UL Recognized 105 (A)] |
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the case and motor windings or case and electromagnetic brake windings |
| Dielectric Strength | - Sufficient to withstand 1.0 kVAC, 50 Hz or 60 Hz between the case and motor windings or case and electromagnetic brake windings for 1 minute. |
| Ambient Temperature | - 0 to +40ºC (non-freezing) (+32 ~ +104ºF) |
| Ambient Humidity | - 85% or less (Non-condensing) |
| Operating Atmosphere | - No corrosive gases or dust. The product should not be exposed to water, oil or other liquids. |
| Degree of Protection | - IP30 (excluding rack moving part and connector part) |
| Rotation Detection Range in Power OFF State | - ±900 Rotations (1800 Rotations at Motor Output Shaft) |
