Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for LM4F10DSC25ECM-10
The LM4F10DSC25ECM-10 specifies: The Rack and Pinion System L Series- DSC Series Equipped is a linear actuator in which a rack and pinion mechanism with a motor have been combined. The on-board AC speed control motor allows for reasonable speed control., Vertical Operation, Speed Controller and Connection Cables required* (sold separately)
| Frame Size | - 80 mm |
| Electromagnetic Brake | - Equipped |
| Linear Direction | - Vertical |
| Motor Type | - DSC Series (Speed Control) |
| Power Input | - AC |
| Power Supply | - Single-Phase 220/230 VAC |
| Speed Control Range | - 50 Hz = 2.2 to 10 mm/s, 60 Hz = 2.2 to 11 mm/s |
| Basic Rack Speed | - 10 mm/s |
| Max. Vertical Transportable Mass | - 67 kg |
| Stroke | - 1000 mm |
| Thermal Class | - 130 (B) |
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. |
| Dielectric Strength | - Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. |
| RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| Safety Standards | - c-UL, CCC, CE |
| CE Marking | - Low Voltage Directives, EMC Directive |
| Temperature Rise | - A gearhead or equivalent heat sink is connected to the motor and the winding temperature rise is measured at 176ºF (80ºC) or less using the resistance change method after rated operation with no load under normal ambient temperature and humidity. |
| Overheat Protection Device | - Built-in Thermal Protector (automatic return type) Open: 130 ± 5ºC Close: 85 ± 20ºC |
| Altitude | - Max. of 1000 m (3300 ft.) above sea level |
| Ambient Temperature | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
| Ambient Humidity | - 85% max. (non-condensing) |
| Degree of Protection | - IP20 |
