Network Gateway (CC-Link Compatible) - NETC01-CC

Product specifications for NETC01-CC

The NETC01-CC specifies: Network gateways are a device that converts from the host communication protocol to Oriental Motor’s own RS-485 communication protocol. By using this network gateway, our RS-485 compatible products can be controlled under host communication environment., Includes: Communication Cable, Power Supply Connector, ,

Network	- CC-Link
Power Supply	- 24 VDC ±10% 0.2A
Communication Protocol	- CC-Link Ver. 1.10
Baud Rate	- 156kbps/625kbps/2.5Mbps/5Mbps/10Mbps
Station Type	- Remote device station
Number of Occupied Stations	- 4
Max. # of Connectable Units	- Number of units which meet the following requirements: (1 x a) + (2 x b) + (3 x c) + (4 x d) ≤ 64 a: # of units w/ 1 occupied station b: # of units w/ 2 occupied stations c: # of units w/ 3 occupied stations d: # of units with 4 occupied stations (16 x A) + (54 x B) + (88 x C) ≤ 2304 A: # of remote I/O station units (64 max.) B: # of remote device station units (42 max.) # of local stations (26 max.)
Insulation Resistance	- 100 MΩ or more when a 500 VDC megger is applied between the following locations: FG Terminal - Power Supply Terminal
Dielectric Strength	- Sufficient to withstand 500 VAC, 50 or 60 Hz applied between the following places for 1 minute: FG Terminal - Power Supply Terminal
Ambient Temperature	- 0 ~ +40ºC (+32 ~ 104ºF)(non-freezing)
Ambient Humidity	- 85% or less (Non-condensing)
Altitude	- Up to 1000 m (3300 ft.) above sea level
Operating Environment	- No corrosive gases, dust, water or oil.