Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for NETC01-M3
The NETC01-M3 specifies: Network gateways are a device that converts from the host communication protocol to Oriental Motor’s own RS-485 communication protocol. By using this network gateway, our RS-485 compatible products can be controlled under host communication environment., Includes: Communication Cable, Power Supply Connector, ,
| Network | - MECHATROLINK - III |
| Power Supply | - 24 VDC ±10% 0.2A |
| Baud Rate | - 100MBps |
| Transmission Speed | - 0.5ms/1.0ms/1.5ms/2.0ms/2.5ms/3.0ms/3.5ms/4.0ms/8.0ms |
| Station Address | - 03h ~ Efh (initial value: 61 h) |
| Transmission Bytes | - 16/32/48/64 bits (initial value: 32 bits) |
| Profile | - Standard I/O command |
| Insulation Resistance | - 100 MΩ or more when a 500 VDC megger is applied between the following locations: FG Terminal - Power Supply Terminal |
| Dielectric Strength | - Sufficient to withstand 500 VAC, 50 or 60 Hz applied between the following places for 1 minute: FG Terminal - Power Supply Terminal |
| Ambient Temperature | - 0 ~ +40ºC (+32 ~ 104ºF)(non-freezing) |
| Ambient Humidity | - 85% or less (Non-condensing) |
| Altitude | - Up to 1000 m (3300 ft.) above sea level |
| Operating Environment | - No corrosive gases, dust, water or oil. |
Product options for NETC01-M3
COMPATIBLE PRODUCTS | |
| Accessories | - Control Module - OPX-2A |
| Accessories | - Data Setting Software Communication Cable - CC05IF-USB |
| Accessories | - Control Module - OPX-2A |
| Accessories | - Data Setting Software Communication Cable - CC05IF-USB |
| Accessories | - RS485 Communication Cable (0.33 ft. [0.1 m]) - CC001-RS4 |
| Accessories | - RS485 Communication Cable (0.82 ft. [0.25 m]) - CC002-RS4 |
