Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PKP264D28B2-SG9
The PKP264D28B2-SG9 specifies: Incorporating the SH gears with high permissible torque delivers high resolution, high torque and smooth low-speed rotation., Flat Connector type, Bipolar winding, Motor cable required* (sold separately),
Basic Step Angle | - 1.8º | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Type | - Geared | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Frame Size | - 2.36 in, 60 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 3.09 in., 78.50 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 352 oz-in, 2.5 N·m | Current per Phase | - 2.8 A/phase | Voltage (VDC) | - 0.92 | Resistance (Ω/phase) | - 0.33 | Inductance (mH/phase) | - 0.81 | Motor Connection Type | - Flat Connector | Connection Type | - Bipolar | Shaft/Gear Type | - Spur Gear (Offset Shaft) | Gear Ratio (X:1) | - 9 :1 | Output Shaft | - Metric | Output Shaft Diameter | - 8 mm | Backlash | - 2 arc min(0.034º) | Shaft | - Double | Step Angle | - 0.20 ° | Lead Wires | - 4 | Rotor Inertia | - 0.77 oz-in², 140x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Insulation Class | - 130 (B) | Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. | Dielectric Strength | - No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 1.0 kVAC 50/60 Hz | Temperature Rise | - Winding temperature rise 144ºF (80ºC) max. | Ambient Temperature Range | - 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) | Ambient Humidity | - 85% or less (Non-condensing) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Step Accuracy | - ±3 arc minutes (±0.05º) | Radial Load | - 0 in. from Shaft End = 6.7 lb, 0.2 in. from Shaft End = 9 lb, 0.39 in. from Shaft End = 11.2 lb, 0.59 in. from Shaft End = 13.5 lb, 0.79 in. from Shaft End = 15.7 lb, 0 mm from Shaft End = 30 N, 5 mm from Shaft End = 40 N, 10 mm from Shaft End = 50 N, 15 mm from Shaft End = 60 N, 20 mm from Shaft End = 70 N | Axial Load | - 6.7 lb, 30 N | Radial Play | - 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) | Axial Play | - 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | |
Product options for PKP264D28B2-SG9
Product tips for PKP264D28B2-SG9
Product announcements for PKP264D28B2-SG9
Product documents for PKP264D28B2-SG9
- PKP Series Operating Manual | |
- 3D CAD (*.step) | |
- PKP Series Operating Manual |