Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PKP264U10A2-R2EL
The PKP264U10A2-R2EL specifies: The high-torque PKP series 2-phase Unipolar stepper motor provide high torque, low vibration and low noise., Flat Connector type, Unipolar Winding, Motor and Encoder cable required* (sold separately),
Motor Type | - 2-Phase |
Basic Step Angle | - 1.8º |
Frame Size | - 2.22 in, 56.4 mm |
Motor Length | - 2.19 in., 55.5 mm |
Holding Torque | - 82 oz-in, 0.58 N·m |
Type | - High-Torque |
Current per Phase (A/phase) | - 1 |
Voltage (VDC) | - 4.4 |
Resistance (Ω/phase) | - 4.4 |
Inductance (mH/phase) | - 6 |
Shaft/Gear Type | - Round Shaft with Flat (No Gearhead) |
Output Shaft Diameter | - 8 mm |
Shaft | - Single |
Encoder | - Equipped |
Electromagnetic Brake | - Not Equipped |
Motor Connection Type | - Flat Connector |
Connection Type | - Unipolar |
Lead Wires | - 5 |
Rotor Inertia | - 0.77 oz-in², 140x10-7 kg·m² |
RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Insulation Class | - 130 (B) |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength | - No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 1.0 kVAC 50/60 Hz |
Temperature Rise | - Winding temperature rise 144ºF (80ºC) max. |
Ambient Temperature Range | - 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity | - 85% or less (Non-condensing) |
Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. |
Step Accuracy | - ±3 arc minutes (±0.05º) |
Radial Load | - 0 in. from Shaft End = 20 lb, 0.2 in. from Shaft End = 22 lb, 0.39 in. from Shaft End = 29 lb, 0.59 in. from Shaft End = 40 lb, 0.79 in. from Shaft End = 60 lb, 0 mm from Shaft End = 90 N, 5 mm from Shaft End = 100 N, 10 mm from Shaft End = 130 N, 15 mm from Shaft End = 180 N, 20 mm from Shaft End = 270 N |
Axial Load | - 6.7 lb, 30 N |
Radial Play | - 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play | - 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
Concentricity | - 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. |
Product options for PKP264U10A2-R2EL
COMPATIBLE PRODUCTS | |
Accessories | - Mounting Bracket - PALW2P-2 |
Driver | - Microstep Driver (24 VDC) - CMD2112P |
Driver | - Driver Lead Wire Set 0.6m (2 ft.) - LCS01CMK2 |
Driver | - Driver Lead Wire Set 0.6m (2 ft.) - LCS01CMK2 |
Driver | - Microstep Driver (24 VDC) - CMD2112P |
Motor Cables (*required) | - Motor Connection Cable 2 ft. (0.6 m) - LC2U06E |
Motor Cables (*required) | - Motor Cable (3.3 ft. [1m]) - LC2U10E |
Motor Cables (*required) | - Motor Connection Cable 2 ft. (0.6 m) - LC2U06E |
Motor Cables (*required) | - Motor Cable (3.3 ft. [1m]) - LC2U10E |
Motor Cables (*required) | - Encoder Cable (2 ft. [0.6 m]) - LCE08A-006 |
Motor Cables (*required) | - Flexible Shield Encoder Cable (1 m (3.3 ft.)) - CC010E1R |
Motor Cables (*required) | - Flexible Shield Encoder Cable (2 m (6.6 ft.)) - CC020E1R |
Product tips for PKP264U10A2-R2EL
Product announcements for PKP264U10A2-R2EL
Product documents for PKP264U10A2-R2EL
- PKP Series Operating Manual | |
- PKP Series Encoder Operating Manual | |
- 3D CAD (*.step) |