Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PV264-02BA
The PV264-02BA specifies: The PV series provides, on average, 1.5 times higher torque than a standard stepper motor. By utilizing a larger rotor diameter, larger magnets can be used to significantly increase the output torque.
Motor Type | - 2-Phase |
Basic Step Angle | - 1.8º |
Frame Size | - 2.36 in, 60 mm |
Motor Length | - 1.71 in., 43.5 mm |
Holding Torque | - 106 oz-in, 0.75 N·m |
Type | - High-Inertia |
Current per Phase (A/phase) | - 2 |
Voltage (VDC) | - 2.9 |
Resistance (Ω/phase) | - 1.46 |
Inductance (mH/phase) | - 1.8 |
Shaft/Gear Type | - Round Shaft with Flat (No Gearhead) |
Output Shaft Diameter | - 1/4 in. |
Shaft | - Double |
Encoder | - Not Equipped |
Electromagnetic Brake | - Not Equipped |
Motor Connection Type | - Connector |
Connection Type | - Unipolar |
Lead Wires | - 6 |
Rotor Inertia | - 1.53 oz-in², 280x10-7 kg·m² |
RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Insulation Class | - Class B [266ºF (130ºC)] |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength | - Sufficient to withstand 1.0 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
Temperature Rise | - Temperature rise of the windings is 176ºF (80ºC) or less measured by the change resistance method. (at rated voltage, at standstill, 2 phases energized) |
Ambient Temperature Range | - 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity | - 85% or less (Non-condensing) |
Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. |
Step Accuracy | - ±2 arc minutes (±0.034º) |
Radial Load | - 0 in. from Shaft End = 11.2 lb, 0.2 in. from Shaft End = 13.5 lb, 0.39 in. from Shaft End = 16.8 lb, 0.59 in. from Shaft End = 22 lb, 0.79 in. from Shaft End = 33.7 lb, 0 mm from Shaft End = 60 N, 5 mm from Shaft End = 50 N, 10 mm from Shaft End = 75 N, 15 mm from Shaft End = 100 N, 20 mm from Shaft End = 150 N |
Axial Load | - 4.5 lb, 20 N |
Radial Play | - 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play | - 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
Concentricity | - 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. |
Product options for PV264-02BA
COMPATIBLE PRODUCTS | |
Accessories | - Mounting Bracket - PALW2P-2 |
Accessories | - Clean Dampers - D6CL-6.3F |
Driver | - Microstep Driver (24 VDC) - CMD2120P |
Driver | - Driver Lead Wire Set 0.6m (2 ft.) - LCS01CMK2 |
Driver | - Driver Lead Wire Set 0.6m (2 ft.) - LCS01CMK2 |
Driver | - Microstep Driver (24 VDC) - CMD2120P |
Driver | - Microstep Driver (24 VDC) - CMD2120P |