Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PKP225U09B2
The PKP225U09B2 specifies: The high-torque PKP series stepper motor offers balanced performance enhanced by high torque, low vibration and low noise., Unipolar Winding, Motor cable required (sold separately),
Motor Type | - 2-Phase |
Basic Step Angle | - 1.8º |
Frame Size | - 1.1 in, 28 mm |
Motor Length | - 2.64 in., 67 mm |
Holding Torque | - 19.1 oz-in, 0.135 N·m |
Type | - High-Torque |
Current per Phase (A/phase) | - 0.95 |
Voltage (VDC) | - 4.4 |
Resistance (Ω/phase) | - 4.6 |
Inductance (mH/phase) | - 2.11 |
Shaft/Gear Type | - Round Shaft with Flat (No Gearhead) |
Output Shaft Diameter | - 5 mm |
Shaft | - Single |
Encoder | - Not Equipped |
Electromagnetic Brake | - Not Equipped |
Motor Connection Type | - Connector |
Connection Type | - Unipolar |
Lead Wires | - 6 |
Rotor Inertia | - 0.098 oz-in², 18x10-7 kg·m² |
RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Insulation Class | - Class B [266ºF (130ºC)] |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength | - Sufficient to withstand 0.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
Temperature Rise | - Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated voltage, at standstill, 2 phases energized) |
Ambient Temperature Range | - 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity | - 85% or less (Non-condensing) |
Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. |
Step Accuracy | - ±3 arc minutes (±0.05º) |
Radial Load | - 0 in. from Shaft End = 5.6 lb, 0.2 in. from Shaft End = 7.6 lb, 0.39 in. from Shaft End = 11.7 lb, 0 mm from Shaft End = 25 N, 5 mm from Shaft End = 34 N, 10 mm from Shaft End = 52 N |
Axial Load | - 1.12 lb, 5 N |
Radial Play | - 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play | - 0.075 mm (0.003 in.) T.I.R. |
Concentricity | - 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity | - 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
Product options for PKP225U09B2
COMPATIBLE PRODUCTS | |
Accessories | - Clean Dampers - D4CL-5.0F |
Driver | - Microstep Driver (24 VDC) - CMD2109P |
Driver | - Driver Lead Wire Set 0.6m (2 ft.) - LCS01CMK2 |
Driver | - Driver Lead Wire Set 0.6m (2 ft.) - LCS01CMK2 |
Driver | - Microstep Driver (24 VDC) - CMD2109P |
Motor Cables (required*) | - Motor Cable (2 ft. [0.6 m]) - LC2U06A |
Motor Cables (required*) | - Motor Cable (3.3 ft. [1 m]) - LC2U10A |
Product tips for PKP225U09B2
Product announcements for PKP225U09B2
Product documents for PKP225U09B2
- PKP Series Encoder Operating Manual | |
- PKP Series Operating Manual |