Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PKP246MU12A2
The PKP246MU12A2 specifies: The high-torque PKP series stepper motor offers balanced performance enhanced by high torque, low vibration and low noise., Unipolar Winding, Motor cable required (sold separately),
Motor Type | - 2-Phase |
Basic Step Angle | - 0.9º |
Frame Size | - 1.65 in, 42 mm |
Motor Length | - 1.3 in., 33 mm |
Holding Torque | - 92 oz-in, 0.65 N·m |
Type | - High-Resolution |
Current per Phase (A/phase) | - 1.2 |
Voltage (VDC) | - 4.9 |
Resistance (Ω/phase) | - 4.1 |
Inductance (mH/phase) | - 6.7 |
Shaft/Gear Type | - Round Shaft with Flat (No Gearhead) |
Output Shaft Diameter | - 5 mm |
Shaft | - Single |
Encoder | - Not Equipped |
Electromagnetic Brake | - Not Equipped |
Motor Connection Type | - Connector |
Connection Type | - Unipolar |
Lead Wires | - 6 |
Rotor Inertia | - 0.64 oz-in², 116x10-7 kg·m² |
RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Insulation Class | - 130 (B) |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength | - No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 0.5 kVAC 50/60 Hz |
Temperature Rise | - Winding temperature rise 144ºF (80ºC) max. |
Ambient Temperature Range | - 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity | - 85% or less (Non-condensing) |
Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. |
Step Accuracy | - ±3 arc minutes (±0.05º) |
Radial Load | - 0 in. from Shaft End = 7.8 lb, 0.2 in. from Shaft End = 9.9 lb, 0.39 in. from Shaft End = 13 lb, 0.59 in. from Shaft End = 19.1 lb, 0 mm from Shaft End = 35 N, 5 mm from Shaft End = 44 N, 10 mm from Shaft End = 58 N, 15 mm from Shaft End = 85 N |
Axial Load | - 3.3 lb, 15 N |
Radial Play | - 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play | - 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
Concentricity | - 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. |
Product options for PKP246MU12A2
COMPATIBLE PRODUCTS | |
Driver | - Microstep Driver (24 VDC) - CMD2112P |
Driver | - Driver Lead Wire Set 0.6m (2 ft.) - LCS01CMK2 |
Motor Cables (*Required) | - Motor Connection Cable 2 ft. (0.6 m) - LC2U06E |
Motor Cables (*Required) | - Motor Cable (3.3 ft. [1m]) - LC2U10E |