Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PKE566AC-FC20RA
The PKE566AC-FC20RA specifies: The PKE series hybrid stepper motors are designed to provide high performance and energy savings. To achieve constant maximum torque output with lower heat generation and save energy, the motor losses have been substantially reduced allowing them to be operated for longer hours at high speed which is not possible with conventional stepper motors. For use with RKII Series Drivers., Constant Duty, Low Noise, Low Vibration,
Frame Size | - 2.36 in, 60 mm | |||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 5.83 in., 148 mm | |||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 976 oz-in, 7 N·m | Type | - Geared | Shaft/Gear Type | - Right-Angle Spur / Face Gear | Gear Ratio (X:1) | - 20 :1 | Backlash | - 10 arc min (0.17º) | Cable Direction | - Up | Encoder | - Not Equipped | Shaft | - Single | Electromagnetic Brake | - Not Equipped | Power Input | - AC | Current | - 0.75 A | Basic Step Angle | - 0.036º | Permissible Speed Range (r/min) | - 0 ~ 150 | Rotor Inertia | - 1.48 oz-in², 270x10-7 kg·m² | Permissible Overhung Load | - 0 in. from Shaft End = 60 lb, 0.2 in. from Shaft End = 65 lb, 0.39 in. from Shaft End = 69 lb, 0.59 in. from Shaft End = 74 lb, 0.79 in. from Shaft End = 78 lb, 0 mm from Shaft End = 270 N, 10 mm from Shaft End = 310 N, 15 mm from Shaft End = 330 N, 20 mm from Shaft End = 350 N, 5 mm from Shaft End = 290 N | Permissible Thrust Load | - 45 lb, 200 N | RoHS Compliant | - Yes | Safety Standards | - UL, CE | CE Marking | - Low Voltage Directives, EMC Directives | Radial Play | - 0.001 inch (0.025 mm) max. of 1.12 lb. (5 N) | Axial Play | - 0.003 in (0.075 mm) max. of 2.2 lb. (10 N) | |
Product options for PKE566AC-FC20RA
Product tips for PKE566AC-FC20RA
Product announcements for PKE566AC-FC20RA
Product documents for PKE566AC-FC20RA
- General Specifications | |
- RKII Series Motor Operating Manual | |
- 3D CAD (*.step) |