Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for ARM98MK-FR50L
Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||
Motor Type | - Closed Loop | |||||||||||||||||||||||||||||||||||||||||||||
Frame Size | - 3.54 in, 90 mm | |||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 6.97 in., 177 mm | |||||||||||||||||||||||||||||||||||||||||||||
Driver Voltage Input Power | - DC | |||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 7072 oz-in, 50 N·m | Shaft/Gear Type | - Hollow Shaft Flat Gear | Gear Ratio (X:1) | - 50 :1 | Backlash | - 0.5º or less (reference value) | Shaft | - Single | Electromagnetic Brake | - Equipped | Cable Direction | - Left | Resolution (Resolution Setting: 1000 P/R) | - 0.0072 °/Pulse | Permissible Speed Range (r/min) | - 0 ~ 40 | Rotor Inertia | - 6.7 oz-in², 1220x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - UL, CE | CE Marking | - EMC Directives | Insulation Class | - Class B [130ºC (266ºF)] | Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the following places: | Case - Motor and sensor windings Case - Electromagnetic brake windings Dielectric Strength | - Sufficient to withstand the following for 1 minute: | Case - Motor and sensor windings 1.0 kVAC 50 Hz or 60 Hz Case - Electromagnetic brake windings 1.0 kVAC 50 Hz or 60 Hz Ambient Temperature | - 0 ~ 50ºC (32 ~ 122ºF) (non-freezing) | (when a heat sink of a capacity at least equivalent to an aluminum plate with a size of 3.94 x 3.94 in., 0.24 in. thick is installed.) Ambient Humidity | - 85% or less (Non-condensing) | Operating Atmosphere | - No corrosive gases, dust water or oil | Degree of Protection | - IP65 (excluding the mounting surface and connector) | Permissible Overhung Load | - 0.39 in. from Shaft End = 337 lb, 0.79 in. from Shaft End = 287 lb, 10 mm from Shaft End = 1500 N, 20 mm from Shaft End = 1280 N | Permissible Thrust Load | - 112 lb, 500 N | |
Product options for ARM98MK-FR50L
Product tips for ARM98MK-FR50L
Product announcements for ARM98MK-FR50L
Product documents for ARM98MK-FR50L
- 3D CAD (*.step) | |
- AR Series FR Geared Type Operating Manual | |
- AR-FR Installation Manual | |
- Product Brochure |