Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for AZM46M0C
Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||
Frame Size | - 1.65 in, 42 mm | |||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 3.98 in., 101 mm | |||||||||||||||||||||||||||||||||||||||||||||||
Driver Voltage Input Power | - AC | |||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 42 oz-in, 0.30 N·m | Holding Torque at Motor Standstill | - 21 oz-in, 0.15 N·m | Holding Torque at Standstill Electromagnetic Brake | - 21 oz-in, 0.15 N·m | Type | - Absolute Mechanical Encoder | Shaft/Gear Type | - Round Shaft (No Gearhead) | Shaft | - Single | Electromagnetic Brake | - Equipped | Resolution (Resolution Setting: 1000 P/R) | - 0.36 °/Pulse | Rotor Inertia | - 0.39 oz-in², 71x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - UL, CSA, CE | CE Marking | - Low Voltage Directives, EMC Directives | Insulation Class | - Class B [130ºC (266ºF)] | [Recognized as 105 (A) by UL.] Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the following places: | Case - Motor and sensor windings Dielectric Strength | - Sufficient to withstand the following for 1 minute: | Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz Ambient Temperature | - 0 ~ 40ºC (32 ~ 104ºF) (non-freezing) | Ambient Humidity | - 85% or less (Non-condensing) | Degree of Protection | - IP66 (excluding the mounting surface and connector) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Permissible Overhung Load | - 0 in. from Shaft End = 7.8 lb, 0.2 in. from Shaft End = 9.9 lb, 0.39 in. from Shaft End = 13 lb, 0.59 in. from Shaft End = 19.1 lb, 0 mm from Shaft End = 35 N, 10 mm from Shaft End = 58 N, 15 mm from Shaft End = 85 N, 5 mm from Shaft End = 44 N | Permissible Axial Load | - 3.40 lb, 16 N | |