Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for AZM66AK-PS25
Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Frame Size | - 2.36 in, 60 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 4.88 in., 124 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Driver Voltage Input Power | - DC | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 1132 oz-in, 8 N·m | Holding Torque at Motor Standstill | - 1076 oz-in, 7.6 N·m | Type | - Absolute Mechanical Encoder | Shaft/Gear Type | - Planetary Gear | Gear Ratio (X:1) | - 25 :1 | Backlash | - 35 arc min | Shaft | - Single | Electromagnetic Brake | - Not Equipped | Resolution (Resolution Setting: 1000 P/R) | - 0.0144 °/Pulse | Permissible Speed Range (r/min) | - 0 ~ 120 | Rotor Inertia | - 2 oz-in², 370x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - CE | CE Marking | - EMC Directives | Insulation Class | - Class B [130ºC (266ºF)] | Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the following places: | Case - Motor and sensor windings Dielectric Strength | - Sufficient to withstand the following for 1 minute: | Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz Ambient Temperature | - 0 ~ 40ºC (32 ~ 104ºF) (non-freezing) | Ambient Humidity | - 85% or less (Non-condensing) | Operating Atmosphere | - Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids. | Degree of Protection | - IP66 (excluding the mounting surface and connector) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Permissible Overhung Load | - 0 in. from Shaft End = 67 lb, 0.2 in. from Shaft End = 76 lb, 0.39 in. from Shaft End = 90 lb, 0.59 in. from Shaft End = 105 lb, 0.79 in. from Shaft End = 126 lb, 0 mm from Shaft End = 300 N, 10 mm from Shaft End = 400 N, 15 mm from Shaft End = 470 N, 20 mm from Shaft End = 560 N, 5 mm from Shaft End = 340 N | Permissible Axial Load | - 45 lb, 200 N | |
Product options for AZM66AK-PS25
Product tips for AZM66AK-PS25
Product announcements for AZM66AK-PS25
Product documents for AZM66AK-PS25
- Product Brochure | |
- AZ Series Motor Operating Manual | |
- 3D CAD (Motor) (*.step) |