Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for AZM66MC-FC30UA
Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Frame Size | - 2.36 in, 60 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 8.13 in., 206.5 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Driver Voltage Input Power | - AC | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 1472 oz-in, 10.5 N·m | Holding Torque at Motor Standstill | - 1487 oz-in, 10.5 N·m | Holding Torque at Standstill Electromagnetic Brake | - 1487 oz-in, 10.5 N·m | Type | - Absolute Mechanical Encoder | Shaft/Gear Type | - Right-Angle Spur / Face Gear | Gear Ratio (X:1) | - 30 :1 | Backlash | - 10 arc min (0.17º) | Shaft | - Single | Electromagnetic Brake | - Equipped | Cable Direction | - Up | Resolution (Resolution Setting: 1000 P/R) | - 0.012 °/Pulse | Permissible Speed Range (r/min) | - 0 ~ 100 | Rotor Inertia | - 2.90 oz-in², 530x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - UL, CSA, CE | CE Marking | - Low Voltage Directives, EMC Directives | Insulation Class | - Class B [130ºC (266ºF)] | [Recognized as 105 (A) by UL.] Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the following places: | Case - Motor and sensor windings Dielectric Strength | - Sufficient to withstand the following for 1 minute: | Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz Ambient Temperature | - 0 ~ 40ºC (32 ~ 104ºF) (non-freezing) | Ambient Humidity | - 85% or less (Non-condensing) | Degree of Protection | - IP66 (excluding the mounting surface and connector) | Stop Position Accuracy | - ±5 arc minutes (±0.084º) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Permissible Overhung Load | - 0 in. from Shaft End = 60 lb, 0.2 in. from Shaft End = 65 lb, 0.39 in. from Shaft End = 69 lb, 0.59 in. from Shaft End = 74 lb, 0.79 in. from Shaft End = 78 lb, 0 mm from Shaft End = 270 N, 10 mm from Shaft End = 310 N, 15 mm from Shaft End = 330 N, 20 mm from Shaft End = 350 N, 5 mm from Shaft End = 290 N | Permissible Axial Load | - 45 lb, 200 N | |