Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for AZM98MC-HS50
Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Frame Size | - 3.54 in, 90 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 8.23 in., 209 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Driver Voltage Input Power | - AC | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 4672 oz-in, 33 N·m | Holding Torque at Motor Standstill | - 4673 oz-in, 33 N·m | Holding Torque at Standstill Electromagnetic Brake | - 4673 oz-in, 33 N·m | Type | - Absolute Mechanical Encoder | Shaft/Gear Type | - Harmonic Gear | Gear Ratio (X:1) | - 50 :1 | Lost Motion | - 0.7 arc min or less | Shaft | - Single | Electromagnetic Brake | - Equipped | Resolution (Resolution Setting: 1000 P/R) | - 0.0072 °/Pulse | Permissible Speed Range (r/min) | - 0 ~ 70 | Rotor Inertia | - 7.90 oz-in², 1450x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - UL, CSA, CE | CE Marking | - Low Voltage Directives, EMC Directives | Insulation Class | - Class B [130ºC (266ºF)] | [Recognized as 105 (A) by UL.] Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the following places: | Case - Motor and sensor windings Dielectric Strength | - Sufficient to withstand the following for 1 minute: | Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz Ambient Temperature | - 0 ~ 40ºC (32 ~ 104ºF) (non-freezing) | Ambient Humidity | - 85% or less (Non-condensing) | Degree of Protection | - IP66 (excluding the mounting surface and connector) | Stop Position Accuracy | - ±5 arc minutes (±0.084º) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Permissible Overhung Load | - 0 in. from Shaft End = 240 lb, 0.2 in. from Shaft End = 250 lb, 0.39 in. from Shaft End = 270 lb, 0.59 in. from Shaft End = 290 lb, 0.79 in. from Shaft End = 310 lb, 0 mm from Shaft End = 1090 N, 10 mm from Shaft End = 1230 N, 15 mm from Shaft End = 1310 N, 20 mm from Shaft End = 1410 N, 5 mm from Shaft End = 1150 N | Permissible Axial Load | - 290 lb, 1300 N | |
Product options for AZM98MC-HS50
Product tips for AZM98MC-HS50
Product announcements for AZM98MC-HS50
Product documents for AZM98MC-HS50
- Product Brochure | |
- AZ Series Motor Operating Manual | |
- 3D CAD (Motor) (*.step) |