Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for Q50AU
The Q50AU specifies: , Q50 Series: LED-based Triangulation Measurement, Infrared LED Range: 50-200 mm; Input: 15 to 30 V dc, Output: 0 to 10V; Response: 4 / 64 ms Selectable, 2 m (6.5ft) Cable, , Part Number:67606,
| Sensing Beam | - Infrared LED |
| Max Measurement Range | - >100 mm - <=500 mm |
| Power | - DC |
| Cable Length (m) | - 2 |
| PC Configurable | - No |
| Sensing Mode (General) | - Proximity |
| Sensing Mode (Detailed) | - Triangulation |
| Housing Style | - Rectangular |
| Device Type | - Sensor |
| Primary Housing Material | - ABS/Polycarbonate |
| Input/Output | - Analog |
| Indicator | - LED(s) |
| Connection | - Flying Leads |
| Analog Output Configuration | - 0-10 V dc |
| Quick Disconnect Type | - No QD |
| Analog Resolution/Discrete Repeatability | - 0.5 |
| Max Sensing Distance (mm) | - 200 |
| Minimum Sensing Distance (mm) | - 50 |
| Power Supply | - 15-30 V dc |
| Delay at Power-up (ms) | - 2000 |
| Sensing Beam Wavelength (nm) | - 880 |
| Adjustments | - Teach Button |
| Temperature Effect (mm/°C) | - 0.08 mm/°C from 0 to 50°C, 0.11 mm/°C from -10 to 55°C |
| Number of Pins | - 5 |
| Vibration | - MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G). |
| Mechanical Shock | - IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave |
| Analog Voltage Output Rating | - 15mA Max |
| Output Protection | - Protected against short circuit conditions |
| IP Rating | - IP67 |
| NEMA Rating | - NEMA 6 |
| Max Operating Temperature (°C) | - 55 |
| Min Operating Temperature (°C) | - -10 |
| Max Op. Relative Humidity Non-Condensing (%) | - 90 at 50°C |
| Window Material | - Acrylic |
| Warm-up Time (minutes) | - 15 |
| Minimum Response Time (ms) | - 4 |
| Spot Size (@ Reference Distance) | - 20 mm |
| Analog Linearity (mm) | - +/- 1.5 |
| Minimum Window Size (mm) | - 5 |
| Color Sensitivity (Typical) | - 90% white to 18% gray: < 1.25 mm; 90% white to 6% black: < 5.5 mm (see chart for details) |
| Remote Teach and Laser Control Input Impedence | - 15 kΩ |
| Max Ambient Light (Lux) | - 10000 |
| Power/Current Consumption (exclusive of load) | - 70 mA |
| Supply Protection Circuitry | - Protected against reverse polarity and transient overvoltages |
| Feature: Remote Teach | - Yes |
| Feature: Timing (Hold/Delay) | - No |
| Feature: Chemical Resistant | - No |
| Feature: Quick Disconnect | - No |
| Common Ethernet Protocol | - No |
| IO Link | - No |
| PROFINET | - No |
| RS-232 | - No |
| RS-422 | - No |
| RS-485 | - No |
| SSI | - No |
| Wireless | - No |
| 1-wire Serial Interface | - No |
| Profibus | - No |
Product options for Q50AU
Product tips for Q50AU
Product announcements for Q50AU
Product documents for Q50AU
| - Q50 CABLE/PIGTAIL | |
| - Q50 CABLE/PIGTAIL | |
| - Q50 CABLE/PIGTAIL | |
| - Q50 CABLE/PIGTAIL | |
| - L-GAGE Q50 Series, Analog Output (Short Range) | |
| - DoC for Q50 |
