Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for DR28T1A03-AZAKD-F
The DR28T1A03-AZAKD-F specifies: The DR Series uses the AZ Series equipped with the Absolute Sensor for the driving motor. The Absolute Sensor is a mechanical multi-turn Absolute Sensor, so an external sensor is not required. This helps to save space and reduce wiring, as well as more compact and lightweight design of the equipment., Low Vibration, High Positioning Accuracy, Reliable Design and Structure, *Connection cables required (sold separately),
Motor Type | - AZ Series with Absolute Sensor |
Actuator Frame Size | - 28 mm |
Drive Method | - Rolled Ball Screw |
Type | - Table Type |
Guide | - Equipped |
Cable Direction | - Down |
Mount | - Flange Mount |
Electromagnetic Brake | - Not Equipped |
Adjusting Knob | - Not Equipped |
Ball Screw Cover | - Not Equipped |
Lead | - 1 mm |
Stroke | - 30 mm |
Max. Vertical Transportable Mass | - 4 kg |
Max. Horizontal Transportable Mass | - 4 kg |
Max. Speed | - 40 mm/s |
Max. Thrust Force | - 40 N |
Max. Holding Force | - 40 N |
Repetitive Positioning Accuracy | - Table Tip on Ball Screw Shaft: ±0.01 mm, Upper Side of Linear Guide: ±0.01 mm mm |
Lost Motion | - 0.05 mmmax. |
Minimum Travel Amount | - 0.001 mm |
Maximum Load Moment | - MP: 0.3 N·m MY: 0.24 N·m MR: 1.5 N·m |
RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards | - CE |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the motor windings and case. |
Dielectric Strength | - Sufficient to withstand 0.5 kV at 50 Hz or 60 Hz applied between the motor windings and case for 1 minute. |
Ambient Temperature Range | - 32ºF ~ 104ºF (0ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity | - 85% or less (noncondensing) |
Product options for DR28T1A03-AZAKD-F
Product tips for DR28T1A03-AZAKD-F
Product announcements for DR28T1A03-AZAKD-F
Product documents for DR28T1A03-AZAKD-F
- DR Series Table Type Operating Manual | |
- DR/DRS Series Function Setting Manual | |
- CAD 3D (*.step) |