Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PKP264D14B-SG10
The PKP264D14B-SG10 specifies: Incorporating the SH gears with high permissible torque delivers high resolution, high torque and smooth low-speed rotation., Bipolar winding, Motor cable required* (sold separately),
Motor Type | - 2-Phase |
Basic Step Angle | - 1.8º |
Frame Size | - 2.36 in, 60 mm |
Motor Length | - 3.09 in., 78.50 mm |
Holding Torque | - 380 oz-in, 2.7 N·m |
Current per Phase (A/phase) | - 1.4 |
Voltage (VDC) | - 3.08 |
Resistance (Ω/phase) | - 2.2 |
Inductance (mH/phase) | - 4.5 |
Shaft/Gear Type | - Spur Gear (Offset Shaft) |
Gear Ratio (X:1) | - 10 :1 |
Output Shaft Diameter | - 8 mm |
Backlash | - 2 arc min(0.034º) |
Shaft | - Double |
Encoder | - Not Equipped |
Motor Connection Type | - Connector |
Connection Type | - Bipolar |
Lead Wires | - 4 |
Rotor Inertia | - 0.66 oz-in², 120x10-7 kg·m² |
RoHS Compliant | - Yes |
Insulation Class | - Class B [266ºF (130ºC)] |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength | - Sufficient to withstand 1.0 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
Temperature Rise | - Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated voltage, at standstill, 2 phases energized) |
Ambient Temperature Range | - 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity | - 85% or less (Non-condensing) |
Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. |
Step Accuracy | - ±3 arc minutes (±0.05º) |
Radial Load | - 0 in. from Shaft End = 6.7 lb, 0.2 in. from Shaft End = 9 lb, 0.39 in. from Shaft End = 11.2 lb, 0.59 in. from Shaft End = 13.5 lb, 0.79 in. from Shaft End = 15.7 lb, 0 mm from Shaft End = 30 N, 5 mm from Shaft End = 40 N, 10 mm from Shaft End = 50 N, 15 mm from Shaft End = 60 N, 20 mm from Shaft End = 70 N |
Axial Load | - 6.7 lb, 30 N |
Radial Play | - 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play | - 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
Concentricity | - 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. |
Product options for PKP264D14B-SG10
COMPATIBLE PRODUCTS | |
Accessories | - Clean Dampers - D6CL-6.3F |
Drivers | - CVD 2-Phase Bipolar Driver - CVD228-K |
Drivers | - CVD 2-Phase Bipolar Driver with Mounting Plate - CVD228BR-K |
Drivers | - CVD 2-Phase Bipolar Driver - CVD228-K |
Drivers | - CVD 2-Phase Bipolar Driver with Mounting Plate - CVD228BR-K |
Drivers | - CVD 2-Phase Bipolar Driver with RS-485 Communication (Right-Angle Type) (24 VDC) - CVD2BR-KR |
Drivers | - CVD 2-Phase Bipolar Driver with RS-485 Communication (24 VDC) - CVD2B-KR |
Motor Cables (required*) | - Motor Cable (2 ft. [0.6 m]) - LC2B06C |
Motor Cables (required*) | - Motor Cable (3.3 ft. [1m]) - LC2B10C |
Product tips for PKP264D14B-SG10
Product announcements for PKP264D14B-SG10
Product documents for PKP264D14B-SG10
- Product Catalog | |
- PKP Series Operating Manual | |
- Motor Dimensions (DXF) |