Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for BHI62SMT-12.5RH
The BHI62SMT-12.5RH specifies: These motors are coupled to an AC electromagnetic brake which is activated when power is not applied. When the power source is turned off, the motor stops instantaneously and holds the load., Power off activated type electromagnetic brake, Conforms to safety standards and global power supply voltages,
Product Line | - Oriental Motor® |
Motor Type | - Electromagnetic Brake - Induction |
Frame Size | - 4.09 in, 104 mm |
Output Power | - 200 W (1/4 HP) |
Voltage (VAC) | - Three-Phase 200/220/230 VAC |
Frequency (Hz) | - 60, 50 |
Current | - 0.95 A [220/230 VAC], 1.1 A [200 VAC] |
Shaft/Gear Type | - Right-Angle Hollow Shaft Gearhead |
Gear Ratio (X:1) | - 12.5 :1 |
Output Shaft Diameter | - 25 mm |
Electromagnetic Brake | - Equipped |
Rated Torque | - 100 lb-in [60 Hz] , 120 lb-in [50 Hz] , 11.4 N·m [60 Hz] , 13.6 N·m [50 Hz] |
Rated Speed (rpm) | - 120 [50 Hz], 144 [60 Hz] |
Permissible Load Inertia | - 1703.13 oz-in2 |
Permissible Load Inertia | - 1703.13 oz-in², 312.5 x 10-4 kg·m² |
Permissible Overhung Load | - 0.39 in. from gearhead mounting surface = 270 lb, 0.79 in. from gearhead mounting surface = 240 lb, 10 mm from gearhead mounting surface = 1200 N, 20 mm from gearhead mounting surface = 1100 N |
Permissible Thrust Load | - 67 lb, 300 N |
RoHS Compliant | - Yes |
Safety Standards | - UL, CSA, EN, CE |
CE Marking | - Low Voltage Directives |
Insulation Resistance | - 100 MΩ or more when 500 VDC is applied between the windings and the case after rated motor operation under normal ambient temperature and humidity. |
Insulation Class | - Class B (266ºF [130ºC]) |
Dielectric Strength | - Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated motor operation under normal ambient temperature and humidity. |
Temperature Rise | - Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead |
Overheat Protection | - Built-in thermal protector (Automatic return type). Operating temperature, open: 302ºF ± 9ºF (150ºC ± 5ºC) close: 204.8ºF ± 27ºF (96ºC ± 15ºC) |
Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) [Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC)] (non-freezing) |
Ambient Humidity | - 85% or less (Non-condensing) |
Degree of Protection | - IP54 |
Product options for BHI62SMT-12.5RH
COMPATIBLE PRODUCTS | |
Accessories | - Torque Arm - SOT6 |
Accessories | - CR Circuit for Surge Suppression - EPCR1201-2 |
Product tips for BHI62SMT-12.5RH
Product announcements for BHI62SMT-12.5RH
Product documents for BHI62SMT-12.5RH
- Product Catalog | |
- BH Brake Motor/Driver Operating Manual | |
- CAD 2D (DXF) |