Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for BHI62S-100RH
The BHI62S-100RH specifies: Induction motors are optimal for uni-directional continuous operation such as a conveyor system., The smallest frame size (4.09 inch [104 mm]) in the 1/3.73 HP (200 W) output class, Hypoid gear-employed, right-angle gearheads, Approved under typical international safety standards; bears the CE marking, Combination type, with the motor and the gearhead coming pre-assembled,
Product Line | - Oriental Motor® |
Motor Type | - Induction |
Frame Size | - 4.09 in, 104 mm |
Output Power | - 200 W (1/4 HP) |
Voltage (VAC) | - Three-Phase 200/220/230 VAC |
Frequency (Hz) | - 60, 50 |
Current | - 0.95 A [220/230 VAC], 1.1 A [200 VAC] |
Shaft/Gear Type | - Right-Angle Hollow Shaft Gearhead |
Gear Ratio (X:1) | - 100 :1 |
Output Shaft Diameter | - 25 mm |
Electromagnetic Brake | - Not Equipped |
Rated Torque | - 480 lb-in , 54.5 N·m |
Rated Speed (rpm) | - 15 [50 Hz], 18 [60 Hz] |
Permissible Load Inertia | - 27250 oz-in2 |
Permissible Load Inertia | - 27250 oz-in², 5000 x 10-4 kg·m² |
Permissible Overhung Load | - 0.39 in. from gearhead mounting surface = 490 lb, 0.79 in. from gearhead mounting surface = 450 lb, 10 mm from gearhead mounting surface = 2200 N, 20 mm from gearhead mounting surface = 2000 N |
Permissible Thrust Load | - 67 lb, 300 N |
RoHS Compliant | - Yes |
Safety Standards | - UL, CSA, CCC, CE |
CE Marking | - Low Voltage Directives |
Insulation Resistance | - 100 MΩ or more when 500 VDC is applied between the windings and the case after rated motor operation under normal ambient temperature and humidity. |
Insulation Class | - Class B (266ºF [130ºC]) |
Dielectric Strength | - Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated motor operation under normal ambient temperature and humidity. |
Temperature Rise | - Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead |
Overheat Protection | - Built-in thermal protector (Automatic return type). Operating temperature, open: 302ºF ± 9ºF (150ºC ± 5ºC) close: 204.8ºF ± 27ºF (96ºC ± 15ºC) |
Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) [Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC)] (non-freezing) |
Ambient Humidity | - 85% or less (Non-condensing) |
Degree of Protection | - IP40 |
Product options for BHI62S-100RH
COMPATIBLE PRODUCTS | |
Accessories | - Torque Arm - SOT6 |
Accessories | - CR Circuit for Surge Suppression - EPCR1201-2 |
Product tips for BHI62S-100RH
Product announcements for BHI62S-100RH
Product documents for BHI62S-100RH
- Product Catalog | |
- BH Series Induction Motors 200W (RoHS) Manual | |
- CAD 2D (DXF) |