Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for 3IK15A-SW2
The 3IK15A-SW2 specifies: Induction motors are optimal for uni-directional continuous operation such as a conveyor system., Optimal for uni-directional continuous operation, Conform to safety standards and global power supply voltages,
Product Line | - Oriental Motor® |
Motor Type | - Induction |
Frame Size | - 2.76 in, 70 mm |
Output Power | - 15 W (1/50 HP) |
Voltage (VAC) | - Three-Phase 200/220/230 VAC |
Frequency (Hz) | - 60, 50 |
Current | - 0.14 A [200 VAC, 60 Hz], 0.15 A [220 VAC, 60 Hz], 0.16 A [230 VAC, 60 Hz], 0.17 A [200 VAC, 50 Hz] |
Shaft/Gear Type | - Round Shaft (No Gearhead) |
Output Shaft | - Metric |
Output Shaft Diameter | - 6 mm |
Type | - Lead Wire |
Electromagnetic Brake | - Not Equipped |
Rated Torque | - 0.89 lb-in [60 Hz] , 0.975 lb-in [50 Hz] , 0.1 N·m [60 Hz] , 0.11 N·m [50 Hz] |
Rated Speed (rpm) | - 1350 [50 Hz], 1650 [60 Hz] |
Permissible Overhung Load | - 0.39 in. from Shaft End = 9 lb, 0.79 in. from Shaft End = 13.5 lb, 10 mm from Shaft End = 40 N, 20 mm from Shaft End = 60 N |
Permissible Thrust Load | - Avoid thrust load as much as possible.If thrust load is unavoidable, keep it to half or less of the motor mass. |
RoHS Compliant | - Yes |
Safety Standards | - UL, CSA, CCC, EN, CE |
CE Marking | - Low Voltage Directives |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
Dielectric Strength | - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
Temperature Rise | - Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to an aluminum heat radiation plate [4.92 x 4.92 in. (125 x 125 mm), Thickness: 0.2 in. (5 mm)] |
Insulation Class | - Class B (266ºF [130ºC]) |
Overheat Protection | - Built-in thermal protector (Automatic return type). Operating temperature, open: 266ºF ± 9ºF (130ºC ± 5ºC) close: 194ºF ± 27ºF (90ºC ± 15ºC) |
Ambient Temperature Range | - Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing), Other voltage: 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity | - 85% maximum (noncondensing) |
Degree of Protection | - IP20 |
Product options for 3IK15A-SW2
COMPATIBLE PRODUCTS | |
Accessories | - Mounting Bracket (Imperial) - SOL3U10 |
Accessories | - Brake Pack - SB50W |