Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for BLMR6200SKM-100-B / BLVD-KRD
The BLMR6200SKM-100-B / BLVD-KRD specifies: The BLV Series R Type brushless DC motor (BLDC motor) speed control system offers the design of motor and driver significantly reduced in size and weight, yet high-power, and contributes to the battery driven automation., 24 - 48 VDC, Battery-operated, Compact and Lightweight, Low speed operation from 1 r/min, Compatible with Modbus (RTU) and CANopen Communication, 1.64 ft. (0.5 m) Cable Included, *Driver Power Cable required (sold separately),
Motor Type | - Brushless DC Motor |
Motor Frame Size | - 4.33 in., 110 mm |
Output Power | - 200 W (1/4 HP) |
Power Supply | - 24 - 48 VDC |
Shaft/Gear Type | - Parallel Shaft Gearhead |
Gear Ratio (X:1) | - 100 :1 |
Output Shaft Diameter | - 22 mm |
Rated Torque | - 450 lb-in, 51.6 N·m |
Electromagnetic Brake | - Equipped |
Brake Type | - Power off activated type, automatically controlled by driver |
Cable Direction | - Opposite Output Shaft Side |
Cable Length (Included) | - 1.64 ft. (0.5 m) |
Variable Speed Range (r/min) | - 0.01 ~ 40 |
Resolution | - 0.01º (36000 Pulses per rotation) , 0.01º (36000 Pulses per rotation) |
Permissible Load Inertia | - 1860000 oz-in², *When instantaneous stop or instantaneous bi-directional operation is performed = 27000 oz-in², 340000 x 10-4 kg·m², *When instantaneous stop or instantaneous bi-directional operation is performed = 5000 x 10-4 kg·m² |
Permissible Overhung Load | - 0.79 in. from Shaft End (3000 r/min) = 280 lb, 0.39 in. from Shaft End (3000 r/min) = 220 lb, 10 mm from Shaft End (3000 r/min) = 900 N, 20 mm from Shaft End (3000 r/min) = 1250 N |
Permissible Thrust Load | - 90 lb, 400 N |
Power Input | - DC |
Input Signals | - 4 Inputs, Photocoupler Input Method |
Output Signals | - 2 Outputs, Photocoupler and Open-Collector Output |
Main Operating Functions | - Continuous Operation, Positioning Operation, JOG Operation, Return-to-Home Operation |
Operating Data Setting Number | - 256 Points |
Max Extension Length | - Motor and Driver Distance: 3.5 m (11.5 ft.) (when a separately sold connection cable is used) |
Time Rating | - Continuous |
Components | - BLVD-KRD [Driver], GFV6G100 [Gearhead], BLMR6200SKM-GFV-B [Motor] |
Safety Standards | - UL, CE |
CE Marking | - EMC Directives |
Insulation Class | - [Motor] UL / CSA Standards: 105 (A), EN Standards: 120 (E) |
Insulation Resistance (Motor) | - 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity. |
Insulation Resistance (Driver) | - 100 M Ω or more when 500 VDC megger is applied between the power supply terminal and heat sink after continuous operation under normal ambient temperature and humidity. |
Dielectric Strength (Motor) | - Sufficient to withstand 0.5 kVAC at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity. |
Dielectric Strength (Driver) | - Sufficient to withstand 0.5 kVAC at 50Hz applied between the power supply terminal and the heat ink for 1 minute after continuous operation under normal ambient temperature and humidity. |
Temperature Rise (Motor) | - The temperature rise of the windings is 60ºC (108ºF) max. and that of the case surface is 50ºC (90ºF) max measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity |
Temperature Rise (Driver) | - The temperature rise of the heat sink is 50ºC (90ºF) max measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity |
Altitude | - Up to 1000 m (3300 ft. ) above sea level |
Vibration | - Not subject to continuous vibration or excessive impact. In conformance with JIS C 60068-2-6 "Sine-wav vibration test method" Frequency Range: 10 Hz to 55 Hz Pulsating Amplitude: 0.15 mm (0.006 in.) Sweep Direction: 3 directions (X, Y, Z) Number of Sweeps: 20 times |
Ambient Temperature Range | - 0ºC ~ +40ºC (+32ºF ~ +104ºF) (nonfreezing) |
Ambient Humidity | - 85% max. (noncondensing) |
Operating Atmosphere | - No corrosive gases or dust.This product should not be exposed to oil. Cannot be used in radioactive area, magnetic field, vacuum or other special environment. |
Degree of Protection | - [Motor] IP40, [Driver] IP20 |
Product options for BLMR6200SKM-100-B / BLVD-KRD
COMPATIBLE PRODUCTS | |
Accessories | - Brushless DC Motor Connection Cables (3.3 ft. (1 m)) - CCM010B1AAF |
Accessories | - Brushless DC Motor Connection Cables (6.6 ft. (2 m)) - CCM020B1AAF |
Accessories | - Brushless DC Motor Connection Cables (3.3 ft. (1 m)) - CCM010B1AAF |
Accessories | - Brushless DC Motor Connection Cables (6.6 ft. (2 m)) - CCM020B1AAF |
Accessories | - Brushless DC Motor Connection Cables (9.8 ft. (3 m)) - CCM030B1AAF |
Accessories | - Mounting Bracket (Metric) - SOL6M8F |
Accessories | - Flexible Coupling (20 mm to 22 mm) - MCL652022 |
Accessories | - Flexible Coupling (22 mm to 22 mm) - MCL652222 |
Accessories | - Flexible Coupling (22 mm to 25 mm) - MCL652225 |
Driver Power Cable (*required) | - Main Power Cable - LC03D06A |
Product tips for BLMR6200SKM-100-B / BLVD-KRD
Product announcements for BLMR6200SKM-100-B / BLVD-KRD
Product documents for BLMR6200SKM-100-B / BLVD-KRD
- 3D CAD (*.step) | |
- 3D CAD (Driver) (*.step) | |
- BLV Series R Type Operating Manual | |
- BLV Series R type Driver CANopen Manual | |
- BLV Series R Type Installation Manual |