Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for NXM640A
The NXM640A specifies: The NX Series tuning free servo motors offer high performance and high accuracy control. Each high performance servo system features 4 control modes and is capable of high accuracy control. Smooth operation can be achieved in high inertia loads or belt drive applications without manual tuning., Four Control Modes:, Position, Speed, Torque, Tension,
Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||||
Rated Output Power | - 400 W (1/2 HP) | |||||||||||||||||||||||||||||||||||||||||||||||||
Motor Frame Size | - 2.36 in., 60 mm | |||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Rated Torque Rated Torque | - 180 oz-in, 1.27 N·m | Max Speed (rpm) | - 5500 | Rated Speed (rpm) | - 3000 | Max Instantaneous Torque | - 540 oz-in, 3.82 N·m | Rotor Inertia | - 1.59 oz-in², 0.291x10-4 kg·m² | Permissible Load Inertia | - 159 oz-in², 29.1x10-4 kg·m² | Resolution (P/R) | - 100 to 100000 (Factory setting 1000) | Detector | - Absolute Encoder | 1 rotation 20 bits, multiple rotations 16 bits Gear/Shaft Type | - Round Shaft (No Gear) | Electromagnetic Brake | - Not Equipped | Permissible Overhung Load | - 0 in. from Shaft End = 51 lb, 0.2 in. from Shaft End = 55 lb, 0.39 in. from Shaft End = 58 lb, 0.59 in. from Shaft End = 63 lb, 0.79 in. from Shaft End = 68 lb, 0 mm from Shaft End = 230 N, 10 mm from Shaft End = 262 N, 15 mm from Shaft End = 281 N, 20 mm from Shaft End = 304 N, 5 mm from Shaft End = 245 N | Permissible Thrust Load | - 22 lb, 98 N | Thermal Class | - 130 (B) | Insulation Resistance (Motor) | - 100 MΩ min. when measured with a 500 VDC megger between the following locations: | Case - Motor Windings Dielectric Voltage (Motor) | - No abnormality is judged with the following application for 1 minute: | Case - Motor Windings 1.5 kVAC 50 Hz or 60 Hz Ambient Temperature (Motor) | - 0 ~ +40ºC (32 ~ 104ºF) (non-freezing) | Ambient Humidity | - 85% max. (non-condensing) | Operating Atmosphere | - No corrosive gases. Must not be exposed to oil or other liquids. | Degree of Protection | - IP65 (excluding installation surface and connector locations.) | Shaft Runout | - 0.05 T.I.R. (mm) | Concentricity | - 0.075 T.I.R. (mm) | Perpendicularity | - 0.075 T.I.R. (mm) | Safety Standards | - CE | UL/CSA RoHS Compliant | - The products do not contain substances that exceed the regulation values in the RoHS Directive. | |
Product options for NXM640A
Product tips for NXM640A
Product announcements for NXM640A
Product documents for NXM640A
- Product Catalog | |
- NX Series Motor Operating Manual | |
- Motor CAD 2D (DXF) | |
- 3D CAD (*.step) |