Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for NXM975M
The NXM975M specifies: The NX Series tuning free servo motors offer high performance and high accuracy control. Each high performance servo system features 4 control modes and is capable of high accuracy control. Smooth operation can be achieved in high inertia loads or belt drive applications without manual tuning., Four Control Modes:, Position, Speed, Torque, Tension,
Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||||
Rated Output Power | - 750 W (1 HP) | |||||||||||||||||||||||||||||||||||||||||||||||||
Motor Frame Size | - 3.35 in., 85 mm | |||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Rated Torque Rated Torque | - 330 oz-in, 2.39 N·m | Max Speed (rpm) | - 5500 | Rated Speed (rpm) | - 3000 | Max Instantaneous Torque | - 1010 oz-in, 7.16 N·m | Rotor Inertia | - 5.6 oz-in², 1.03x10-4 kg·m² | Permissible Load Inertia | - 520 oz-in², 94.8x10-4 kg·m² | Resolution (P/R) | - 100 to 100000 (Factory setting 1000) | Detector | - Absolute Encoder | 1 rotation 20 bits, multiple rotations 16 bits Gear/Shaft Type | - Round Shaft (No Gear) | Electromagnetic Brake | - Equipped | Permissible Overhung Load | - 0 in. from Shaft End = 84 lb, 0.2 in. from Shaft End = 88 lb, 0.39 in. from Shaft End = 91 lb, 0.59 in. from Shaft End = 95 lb, 0.79 in. from Shaft End = 100 lb, 0.98 in. from Shaft End = 105 lb, 1.18 in. from Shaft End = 110 lb, 0 mm from Shaft End = 376 N, 10 mm from Shaft End = 408 N, 15 mm from Shaft End = 426 N, 20 mm from Shaft End = 446 N, 25 mm from Shaft End = 467 N, 30 mm from Shaft End = 491 N, 5 mm from Shaft End = 392 N | Permissible Thrust Load | - 33 lb, 147 N | Thermal Class | - 130 (B) | Insulation Resistance (Motor) | - 100 MΩ min. when measured with a 500 VDC megger between the following locations: | Case - Motor Windings Dielectric Voltage (Motor) | - No abnormality is judged with the following application for 1 minute: | Case - Motor Windings 1.5 kVAC 50 Hz or 60 Hz Ambient Temperature (Motor) | - 0 ~ +40ºC (32 ~ 104ºF) (non-freezing) | Ambient Humidity | - 85% max. (non-condensing) | Operating Atmosphere | - No corrosive gases. Must not be exposed to oil or other liquids. | Degree of Protection | - IP65 (excluding installation surface and connector locations.) | Shaft Runout | - 0.05 T.I.R. (mm) | Concentricity | - 0.075 T.I.R. (mm) | Perpendicularity | - 0.075 T.I.R. (mm) | Safety Standards | - CE | UL/CSA RoHS Compliant | - The products do not contain substances that exceed the regulation values in the RoHS Directive. | |
Product options for NXM975M
Product tips for NXM975M
Product announcements for NXM975M
Product documents for NXM975M
- Product Catalog | |
- NX Series Motor Operating Manual | |
- Motor CAD 2D (DXF) | |
- 3D CAD (*.step) |