Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PKP225D15M2
The PKP225D15M2 specifies: The high-torque PKP series stepper motor offers balanced performance enhanced by high torque, low vibration and low noise., Bipolar Winding, Motor cables required (*sold separately),
Product Line | - VEXTA® | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Type | - 2-Phase | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Basic Step Angle | - 1.8º | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Frame Size | - 1.1 in, 28 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 2.03 in., 51.5 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 26 oz-in, 0.19 N·m | Current per Phase (A/phase) | - 1.5 | Voltage (VDC) | - 3 | Resistance (Ω/phase) | - 2.05 | Inductance (mH/phase) | - 1.6 | Shaft/Gear Type | - Round Shaft with Flat (No Gearhead) | Output Shaft Diameter | - 5 mm | Shaft | - Single | Power Input | - DC | Encoder | - Not Equipped | Electromagnetic Brake | - Equipped | Motor Connection Type | - Connector | Connection Type | - Bipolar | Lead Wires | - 4 | Rotor Inertia | - 0.098 oz-in², 18x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Insulation Class | - Class B [266ºF (130ºC)] | Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. | Dielectric Strength | - Sufficient to withstand 1.0 kVAC at 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. | Temperature Rise | - Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated current, at standstill, 2 phases energized) | Ambient Temperature Range | - 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) | Ambient Humidity | - 85% or less (Non-condensing) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Step Accuracy | - ±3 arc minutes (±0.05º) | Radial Load | - 0 in. from Shaft End = 5.6 lb, 0.2 in. from Shaft End = 7.6 lb, 0.39 in. from Shaft End = 11.7 lb, 0 mm from Shaft End = 25 N, 5 mm from Shaft End = 34 N, 10 mm from Shaft End = 52 N | Axial Load | - 1.12 lb, 5 N | Radial Play | - 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) | Axial Play | - 0.075 mm (0.003 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) | Permissible Thrust Load | - The permissible thrust load shall be no greater than the motor mass. | |
Product options for PKP225D15M2
Product tips for PKP225D15M2
Product announcements for PKP225D15M2
Product documents for PKP225D15M2
- PKP Series Electromagnetic Brake Operating Manual | |
- PKP Series Operating Manual |