Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PKP214U06A-R2E
The PKP214U06A-R2E specifies: The high-torque PKP series stepper motor offers balanced performance enhanced by high torque, low vibration and low noise., Unipolar Winding, Motor cable required (sold separately),
Motor Type | - 2-Phase |
Basic Step Angle | - 1.8º |
Frame Size | - 0.79 in, 20 mm |
Motor Length | - 1.57 in., 40 mm |
Holding Torque | - 3.6 oz-in, 0.026 N·m |
Type | - High-Torque |
Current per Phase (A/phase) | - 0.6 |
Voltage (VDC) | - 4.2 |
Resistance (Ω/phase) | - 7 |
Inductance (mH/phase) | - 2.4 |
Shaft/Gear Type | - Round Shaft with Flat (No Gearhead) |
Output Shaft Diameter | - 4 mm |
Shaft | - Single |
Encoder | - Equipped |
Electromagnetic Brake | - Not Equipped |
Motor Connection Type | - Flying Leads |
Connection Type | - Unipolar |
Lead Wires | - 5 |
Rotor Inertia | - 0.0159 oz-in², 2.9x10-7 kg·m² |
RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Insulation Class | - Class B [266ºF (130ºC)] |
Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength | - Sufficient to withstand 0.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
Temperature Rise | - Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated voltage, at standstill, 2 phases energized) |
Ambient Temperature Range | - 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity | - 85% or less (Non-condensing) |
Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. |
Step Accuracy | - ±3 arc minutes (±0.05º) |
Radial Load | - 0 in. from Shaft End = 2.7 lb, 0.2 in. from Shaft End = 3.3 lb, 0 mm from Shaft End = 12 N, 5 mm from Shaft End = 15 N |
Axial Load | - 0.67 lb, 3 N |
Radial Play | - 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play | - 0.075 mm (0.003 in.) T.I.R. |
Concentricity | - 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity | - 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
Product options for PKP214U06A-R2E
COMPATIBLE PRODUCTS | |
Driver | - Microstep Driver (24 VDC) - CMD2109P |
Driver | - Driver Lead Wire Set 0.6m (2 ft.) - LCS01CMK2 |
Driver | - Driver Lead Wire Set 0.6m (2 ft.) - LCS01CMK2 |
Driver | - Microstep Driver (24 VDC) - CMD2109P |
Product tips for PKP214U06A-R2E
Product announcements for PKP214U06A-R2E
Product documents for PKP214U06A-R2E
- PKP Series Encoder Operating Manual | |
- PKP Series Operating Manual |