Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PKP568N28AA2
The PKP568N28AA2 specifies: The PKP Series 5-phase stepper motor offers superior performance, high torque while providing low vibration and low noise. Basic step angle is 0.72º (500 steps per rev)., 2.22 in. (56.4 mm) Frame Size), 1/4 inch Output Shaft, Motor cable required for connection (see Accessories), DC Driver input type motor only,
Frame Size | - 2.22 in, 56.4 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||
Output Shaft | - Imperial | |||||||||||||||||||||||||||||||||||||||||||||||||||
Output Shaft Diameter | - 1/4 in. | |||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 2.99 in., 76 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||
Basic Step Angle | - 0.72º | |||||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 210 oz-in, 1.5 N·m | Current per Phase | - 2.8 A/phase | Type | - Standard | Shaft/Gear Type | - Round Shaft with Flat (No Gearhead) | Gear Type | - No Gearhead | Motor Connection Type | - Flat Connector | Shaft | - Single | Step Angle | - 0.72 ° | Connection Type | - New Pentagon (Bipolar) | Lead Wires | - 5 | Rotor Inertia | - 2.7 oz-in², 500x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - CE | Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. | Dielectric Strength | - No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 1 kVAC 50/60 Hz | Temperature Rise | - Winding temperature rise 144ºF (80ºC) max. | Ambient Temperature Range | - 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) | Ambient Humidity | - 85% or less (Non-condensing) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Radial Play | - 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) | Axial Play | - 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) | Radial Load | - 0 in. from Shaft End = 20 lb, 0.2 in. from Shaft End = 22 lb, 0.39 in. from Shaft End = 29 lb, 0.59 in. from Shaft End = 40 lb, 0.79 in. from Shaft End = 60 lb, 0 mm. from Shaft End = 90 N, 5 mm from Shaft End = 100 N, 10 mm from Shaft End = 130 N, 15 mm from Shaft End = 180 N, 20 mm from Shaft End = 270 N | Axial Load | - 6.7 lb, 30 N | |
Product options for PKP568N28AA2
COMPATIBLE PRODUCTS | |
Accessories | - Mounting Bracket - PALW2P-2 |
Drivers | - CVD 5-Phase Stepper Motor Driver (24 VDC) - CVD528BR-K |
Motor Connection Cables (*required) | - Motor Connection Cable 2 ft. (0.6 m) - LC5N06E |
Motor Connection Cables (*required) | - Motor Cable (3.3 ft. [1m]) - LC5N10E |