Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PKP564N28A2-TS20
The PKP564N28A2-TS20 specifies: The PKP Series 5-phase stepper motor offers superior performance, high torque while providing low vibration and low noise. Basic step angle is 0.72º (500 steps per rev)., Motor cable required for connection (see Accessories), DC Driver input type motor only,
Frame Size | - 2.36 in, 60 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Output Shaft | - Metric | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Output Shaft Diameter | - 10 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 3.27 in., 83 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Basic Step Angle | - 0.72º | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 704 oz-in, 5 N·m | Current per Phase | - 2.8 A/phase | Type | - Geared | Shaft/Gear Type | - Spur Gear (Offset Shaft) | Gear Type | - Spur Gear, Low Backlash (up to 45 arc min), Offset Shaft | Gear Ratio (X:1) | - 20 :1 | Backlash | - 10 arcmin (0.17º) | Motor Connection Type | - Flat Connector | Shaft | - Single | Step Angle | - 0.036 ° | Connection Type | - New Pentagon (Bipolar) | Lead Wires | - 5 | Rotor Inertia | - 0.77 oz-in², 140x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - CE | Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. | Dielectric Strength | - No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 1 kVAC 50/60 Hz | Temperature Rise | - Winding temperature rise 144ºF (80ºC) max. | Ambient Temperature Range | - 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) | Ambient Humidity | - 85% or less (Non-condensing) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Radial Play | - 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) | Axial Play | - 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) | Radial Load | - 0 in. from Shaft End = 38 lb, 0.2 in. from Shaft End = 41 lb, 0.39 in. from Shaft End = 45 lb, 0.59 in. from Shaft End = 48 lb, 0.79 in. from Shaft End = lb, 0 mm from Shaft End = 170 N, 5 mm from Shaft End = 185 N, 10 mm from Shaft End = 200 N, 15 mm from Shaft End = 215 N, 20 mm from Shaft End = N | Axial Load | - 9 lb, 40 N | |
Product options for PKP564N28A2-TS20
COMPATIBLE PRODUCTS | |
Accessories | - Mounting Bracket (Metric) - SOL2M4 |
Drivers | - CVD 5-Phase Stepper Motor Driver (24 VDC) - CVD528BR-K |
Motor Connection Cables (*required) | - Motor Connection Cable 2 ft. (0.6 m) - LC5N06E |
Motor Connection Cables (*required) | - Motor Cable (3.3 ft. [1m]) - LC5N10E |
Product tips for PKP564N28A2-TS20
Product announcements for PKP564N28A2-TS20
Product documents for PKP564N28A2-TS20
- PKP Series 5-Phase Operators Manual | |
- 3D CAD (Motor) (*.step) |