Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PKP564FN38A2-R2GL
The PKP564FN38A2-R2GL specifies: The PKP Series 5-phase stepper motor offers superior performance, high torque while providing low vibration and low noise. Basic step angle is 0.72º (500 steps per rev)., Motor cable required for connection (see Accessories), DC Driver input type motor only,
Frame Size | - 2.36 in, 60 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||
Output Shaft | - Metric | |||||||||||||||||||||||||||||||||||||||||||||||||||
Output Shaft Diameter | - 8 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 2.38 in., 60.5 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||
Basic Step Angle | - 0.72º | |||||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 93 oz-in, 0.66 N·m | Current per Phase | - 3.8 A/phase | Type | - Standard | Shaft/Gear Type | - Round Shaft with Flat (No Gearhead) | Gear Type | - No Gearhead | Motor Connection Type | - Flat Connector | Shaft | - Single | Step Angle | - 0.72 ° | Connection Type | - New Pentagon (Bipolar) | Lead Wires | - 5 | Rotor Inertia | - 0.88 oz-in², 160x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - CE | Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. | Dielectric Strength | - No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 1 kVAC 50/60 Hz | Temperature Rise | - Winding temperature rise 144ºF (80ºC) max. | Ambient Temperature Range | - 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) | Ambient Humidity | - 85% or less (Non-condensing) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Radial Play | - 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) | Axial Play | - 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) | Radial Load | - 0 in. from Shaft End = 20 lb, 0.2 in. from Shaft End = 22 lb, 0.39 in. from Shaft End = 29 lb, 0.59 in. from Shaft End = 40 lb, 0.79 in. from Shaft End = 60 lb, 0 mm. from Shaft End = 90 N, 5 mm from Shaft End = 100 N, 10 mm from Shaft End = 130 N, 15 mm from Shaft End = 180 N, 20 mm from Shaft End = 270 N | Axial Load | - 6.7 lb, 30 N | |
Product options for PKP564FN38A2-R2GL
COMPATIBLE PRODUCTS | |
Accessories | - Mounting Bracket - PALW2P-5 |
Accessories | - Flexible Coupling (5 mm to 8 mm) - MCV190508 |
Accessories | - Mounting Bracket - PALW2P-5 |
Accessories | - Flexible Coupling (5 mm to 8 mm) - MCV190508 |
Accessories | - Flexible Coupling (6 mm to 8 mm) - MCV190608 |
Accessories | - Flexible Coupling (8 mm to 8 mm) - MCV190808 |
Drivers | - CVD 5-Phase Stepper Motor Driver (24 VDC) - CVD538BR-K |
Motor Connection Cables (*required) | - Motor Connection Cable 2 ft. (0.6 m) - LC5N06E |
Motor Connection Cables (*required) | - Motor Cable (3.3 ft. [1m]) - LC5N10E |
Motor Connection Cables (*required) | - Motor Connection Cable 2 ft. (0.6 m) - LC5N06E |
Motor Connection Cables (*required) | - Motor Cable (3.3 ft. [1m]) - LC5N10E |
Motor Connection Cables (*required) | - Encoder Cable (2 ft. [0.6 m]) - LCE08A-006 |
Motor Connection Cables (*required) | - Flexible Shield Encoder Cable (1 m (3.3 ft.)) - CC010E1R |
Motor Connection Cables (*required) | - Flexible Shield Encoder Cable (2 m (6.6 ft.)) - CC020E1R |
Product tips for PKP564FN38A2-R2GL
Product announcements for PKP564FN38A2-R2GL
Product documents for PKP564FN38A2-R2GL
- PKP Series Operating Manual | |
- PKP Series Encoder Operating Manual | |
- 3D CAD (Motor) (*.step) |