Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for PKE564MC-TS10
The PKE564MC-TS10 specifies: The PKE series hybrid stepper motors are designed to provide high performance and energy savings. To achieve constant maximum torque output with lower heat generation and save energy, the motor losses have been substantially reduced allowing them to be operated for longer hours at high speed which is not possible with conventional stepper motors. For use with RKII Series Drivers., Constant Duty, Low Noise, Low Vibration,
Frame Size | - 2.36 in, 60 mm | |||||||||||||||||||||||||||||||||||||||||
Motor Length | - 1.91 in., 48.50 mm | |||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 560 oz-in, 4 N·m | Type | - Geared | Shaft/Gear Type | - Spur Gear (Offset Shaft) | Gear Ratio (X:1) | - 10 :1 | Backlash | - 15 arc min (0.25º) | Encoder | - Not Equipped | Shaft | - Single | Electromagnetic Brake | - Equipped | Power Input | - AC | Current | - 0.75 A | Basic Step Angle | - 0.072º | Permissible Speed Range (r/min) | - 0 ~ 300 | Rotor Inertia | - 1.75 oz-in², 320x10-7 kg·m² | Permissible Overhung Load | - 0 in. from Shaft End = 27 lb, 0.2 in. from Shaft End = 30 lb, 0.39 in. from Shaft End = 33 lb, 0.59 in. from Shaft End = 37 lb, 0.79 in. from Shaft End = 40 lb, 0 mm from Shaft End = 120 N, 10 mm from Shaft End = 150 N, 15 mm from Shaft End = 165 N, 20 mm from Shaft End = 180 N, 5 mm from Shaft End = 135 N | Permissible Thrust Load | - 9 lb, 40 N | RoHS Compliant | - Yes | Safety Standards | - UL, CE | CE Marking | - Low Voltage Directives, EMC Directives | Radial Play | - 0.001 inch (0.025 mm) max. of 1.12 lb. (5 N) | Axial Play | - 0.003 in (0.075 mm) max. of 2.2 lb. (10 N) | |
Product options for PKE564MC-TS10
Product tips for PKE564MC-TS10
Product announcements for PKE564MC-TS10
Product documents for PKE564MC-TS10
- RKII Series Brochure | |
- General Specifications | |
- RKII Series Motor Operating Manual | |
- Motor CAD 2D (DXF) | |
- 3D CAD (Motor) (*.step) |