Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for ARM26SMK
Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||
Motor Type | - Closed Loop | |||||||||||||||||||||||||||||||||||||||||||||
Frame Size | - 1.1 in, 28 mm | |||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 3.93 in., 100 mm | |||||||||||||||||||||||||||||||||||||||||||||
Driver Voltage Input Power | - DC | |||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 17 oz-in, 0.12 N·m | Shaft/Gear Type | - Round Shaft with Flat (No Gearhead) | Shaft | - Single | Electromagnetic Brake | - Equipped | Resolution (Resolution Setting: 1000 P/R) | - 0.36 °/Pulse | Rotor Inertia | - 0.137 oz-in², 25x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - UL, CE | CE Marking | - EMC Directives | Insulation Class | - Class B [130ºC (266ºF)] | Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the following places: | Case - Motor and sensor windings Case - Electromagnetic brake windings Dielectric Strength | - Sufficient to withstand the following for 1 minute: | Case - Motor and sensor windings 1.0 kVAC 50 Hz or 60 Hz Case - Electromagnetic brake windings 1.0 kVAC 50 Hz or 60 Hz Ambient Temperature | - -10 ~ 50ºC (14 ~ 122ºF) (non-freezing) | (when a heat sink of a capacity at least equivalent to an aluminum plate with a size of 3.94 x 3.94 in., 0.24 in. thick is installed.) Ambient Humidity | - 85% or less (Non-condensing) | Operating Atmosphere | - No corrosive gases, dust water or oil | Degree of Protection | - IP20 | Stop Position Accuracy | - ±4 arc minutes (±0.067º) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Permissible Overhung Load | - 0 in. from Shaft End = 5.6 lb, 0.2 in. from Shaft End = 7.6 lb, 0.39 in. from Shaft End = 11.7 lb, 0 mm from Shaft End = 25 N, 10 mm from Shaft End = 52 N, 5 mm from Shaft End = 34 N | Permissible Thrust Load | - 0.49 lb, 2.20 N | |