Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for ARM46AC-FC7.2LA
Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Type | - Closed Loop | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Frame Size | - 1.65 in, 42 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 5.08 in., 129 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Driver Voltage Input Power | - AC | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 99 oz-in, 0.7 N·m | Shaft/Gear Type | - Right-Angle Spur / Face Gear | Cable Direction | - Down | Gear Ratio (X:1) | - 7.2 :1 | Lost Motion | - 25 arc min (0.42°) | Shaft | - Single | Electromagnetic Brake | - Not Equipped | Resolution (Resolution Setting: 1000 P/R) | - 0.05 °/Pulse | Permissible Speed Range (r/min) | - 0 ~ 416 | Rotor Inertia | - 0.32 oz-in², 58x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - UL, CSA, EN, CE | CE Marking | - Low Voltage Directives, EMC Directives | Insulation Class | - Class B [130ºC (266ºF)] | Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the following places: | Case - Motor and sensor windings Case - Electromagnetic brake windings Dielectric Strength | - Sufficient to withstand the following for 1 minute: | Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz Case - Electromagnetic brake windings 1.5 kVAC 50 Hz or 60 Hz Ambient Temperature | - 0 ~ 40ºC (32 ~ 104ºF) (non-freezing) | (when a heat sink of a capacity at least equivalent to an aluminum plate with a size of 9.84 x 9.84 in., 0.24 in. thick is installed.) Ambient Humidity | - 85% or less (Non-condensing) | Operating Atmosphere | - No corrosive gases, dust water or oil | Degree of Protection | - IP65 (excluding the mounting surface and connector) | Stop Position Accuracy | - ±4 arc minutes (±0.067º) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Permissible Overhung Load | - 0 in. from Shaft End = 40 lb, 0.2 in. from Shaft End = 45 lb, 0.39 in. from Shaft End = 49 lb, 0.59 in. from Shaft End = 56 lb, 0 mm from Shaft End = 180 N, 10 mm from Shaft End = 220 N, 15 mm from Shaft End = 250 N, 5 mm from Shaft End = 200 N | Permissible Thrust Load | - 22 lb, 100 N | |
Product options for ARM46AC-FC7.2LA
Product tips for ARM46AC-FC7.2LA
Product announcements for ARM46AC-FC7.2LA
Product documents for ARM46AC-FC7.2LA
- AR Series User Manual | |
- AR Series Operating Manual | |
- 3D CAD (*.step) |