Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for ARM66AC-N10
Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Frame Size | - 2.36 in, 60 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 4.29 in., 109 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Driver Voltage Input Power | - AC | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 704 oz-in, 5 N·m | Type | - Continuous Duty | Shaft/Gear Type | - Planetary Gear | Gear Ratio (X:1) | - 10 :1 | Backlash | - 1º or less (reference value) | Shaft | - Single | Electromagnetic Brake | - Not Equipped | Resolution (Resolution Setting: 1000 P/R) | - 0.036 °/Pulse | Permissible Speed Range (r/min) | - 0 ~ 300 | Rotor Inertia | - 2.1 oz-in², 380x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - UL, CSA, EN, CE | CE Marking | - Low Voltage Directives, EMC Directives | Insulation Class | - Class B [130ºC (266ºF)] | Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the following places: | Case - Motor and sensor windings Dielectric Strength | - Sufficient to withstand the following for 1 minute: | Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz Ambient Temperature | - -10 ~ 50ºC (14 ~ 122ºF) (non-freezing) | (when a heat sink of a capacity at least equivalent to an aluminum plate with a size of 9.84 x 9.84 in., 0.24 in. thick is installed.) Ambient Humidity | - 85% or less (Non-condensing) | Operating Atmosphere | - No corrosive gases, dust water or oil | Degree of Protection | - IP65 (excluding the mounting surface and connector) | Stop Position Accuracy | - ±4 arc minutes (±0.067º) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Permissible Overhung Load | - 0 in. from Shaft End = 56 lb, 0.2 in. from Shaft End = 60 lb, 0.39 in. from Shaft End = 67 lb, 0.59 in. from Shaft End = 76 lb, 0.79 in. from Shaft End = 87 lb, 0 mm from Shaft End = 250 N, 10 mm from Shaft End = 300 N, 15 mm from Shaft End = 340 N, 20 mm from Shaft End = 390 N, 5 mm from Shaft End = 270 N | Permissible Thrust Load | - 45 lb, 200 N | |
Product options for ARM66AC-N10
Product tips for ARM66AC-N10
Product announcements for ARM66AC-N10
Product documents for ARM66AC-N10
- Product Catalog | |
- AR Series User Manual | |
- AR Series User Manual | |
- Motor CAD 2D (DXF) |