Product Description
- Specifications
- Product Options
- Tech Tips
- Announcements
- Documents
Product specifications for AZM46AK-PS10
Product Line | - Oriental Motor® | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Frame Size | - 1.65 in, 42 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Motor Length | - 3.86 in., 98 mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Driver Voltage Input Power | - DC | |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Speed-Torque Characteristics | - Holding Torque Holding Torque | - 210 oz-in, 1.50 N·m | Holding Torque at Motor Standstill | - 212 oz-in, 1.5 N·m | Type | - Absolute Mechanical Encoder | Shaft/Gear Type | - Planetary Gear | Gear Ratio (X:1) | - 10 :1 | Backlash | - 15 arc min (0.25º) | Shaft | - Single | Electromagnetic Brake | - Not Equipped | Resolution (Resolution Setting: 1000 P/R) | - 0.036 °/Pulse | Permissible Speed Range (r/min) | - 0 ~ 300 | Rotor Inertia | - 0.30 oz-in², 55x10-7 kg·m² | RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | Safety Standards | - CE | CE Marking | - EMC Directives | Insulation Class | - Class B [130ºC (266ºF)] | Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the following places: | Case - Motor and sensor windings Dielectric Strength | - Sufficient to withstand the following for 1 minute: | Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz Ambient Temperature | - 0 ~ 40ºC (32 ~ 104ºF) (non-freezing) | Ambient Humidity | - 85% or less (Non-condensing) | Operating Atmosphere | - Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids. | Degree of Protection | - IP66 (excluding the mounting surface and connector) | Stop Position Accuracy | - ±4 arc minutes (±0.067º) | Shaft Runout | - 0.05 mm (0.002 in.) T.I.R. | Concentricity | - 0.075 mm (0.003 in.) T.I.R. | Perpendicularity | - 0.075 mm (0.003 in.) T.I.R. | Permissible Overhung Load | - 0 in. from Shaft End = 19.1 lb, 0.2 in. from Shaft End = 22 lb, 0.39 in. from Shaft End = 27 lb, 0.59 in. from Shaft End = 33 lb, 0 mm from Shaft End = 85 N, 10 mm from Shaft End = 120 N, 15 mm from Shaft End = 150 N, 5 mm from Shaft End = 100 N | Permissible Axial Load | - 22 lb, 100 N | |
Product options for AZM46AK-PS10
Product tips for AZM46AK-PS10
Product announcements for AZM46AK-PS10
Product documents for AZM46AK-PS10
- Product Brochure | |
- AZ Series Motor Operating Manual | |
- 3D CAD (Motor) (*.step) |